Sold

Vulcan indirect-fired rotary Calciner/Kiln System, 2 Tons/Hr

Dryer Rotary Kiln
Manufacturer:
VULCAN
Model:
Rotary Calciner
Year:
2024
Stock #:
21835V
Country:
United States
Vulcan Drying Systems indirect-fired rotary calciner/kiln system, designed for approximately 2 tons per hour. Drum dimensions are 4' dia. x 23.5' heated zone. Material of drum is Inconel 600 with 1,800°F operating temperature. Operating Information: - Nominal capacity: 2 TPH - Heating arrangement: indirect fired, six independently controlled zones - Fuel: natural gas - Kiln-zone control temperatures shown around 1,900°F - Kiln-zone high-temperature shutdowns shown at approximately 1,900°F to 2,075°F, depending on the measurement point - Kiln exhaust temperature alarms: 1,000°F warning 1,350°F warning 1,500°F burner/feed shutdown - Product-discharge temperature alarms: 1,400°F warning 1,700°F warning 1,800°F burner shutdown - Exhaust entering the gas-treatment section is identified as approximately 1,200°F and containing steam, particulate matter, and carbon dioxide - Gas leaving the cooling section is shown at approximately 160°F - Quench-water supply is shown as approximately 120°F at 65 PSIG - Condensed-water return is shown as approximately 140°F at 65 PSIG Major Components of System: - Vulcan RK-1033 indirect-fired rotary kiln/calciner - Six natural-gas burners, tags B-1022 through B-1027 - Six dedicated combustion-air blowers, E-1133 through E-1138 - Live-bottom feed bin feeder, LBF-1108 - Inclined feed screw, IFS-1096 - Solids feed hopper, FH-1042 - Variable-speed kiln feed screw, KFS-1042 - Variable-frequency-controlled kiln drive - Product discharge hopper - Inclined discharge screw, IDS-1035 - Water-quench scrubber, VS-1053 - Quench-water circulation pump, QP-1056 - Air-cooled heat exchanger, ACHX-1059 - Induced-draft fan, identified in the component legend as IDF-1076 - PLC-based temperature, pressure, burner-safety, level, and drive controls System Description: The system features a refractory-lined rotary kiln with six independently heated zones. Heat is supplied by six natural-gas-fired burners, each equipped with a dedicated combustion-air blower, gas-flow control valve, automatic shutoff and safety valves, pressure monitoring, spark ignition, burner controller, and burner-status indication. Feed material is introduced through a live-bottom feeder and transferred by an inclined feed screw to a solids feed hopper. A variable-speed kiln feed screw meters material from the hopper into the rotary kiln. The kiln is driven by a variable-frequency-controlled drive, allowing adjustment of drum speed and material retention time. The kiln incorporates multiple temperature-monitoring points along its length, with individual zone temperature-control loops and high- and low-temperature alarms. The controls include burner permissives, flame supervision, gas-pressure alarms, draft-pressure control, drive overload protection, feed-hopper level monitoring, and automatic burner shutdown interlocks. Calcined product exits the kiln through a discharge hopper and is removed by an inclined discharge screw conveyor. The discharge section includes temperature monitoring and high-temperature alarms designed to shut down the kiln burners at elevated product temperatures. Kiln exhaust gases are maintained under negative pressure by an induced-draft system. System includes exhaust-gas temperature and draft-pressure monitoring, a water-quench scrubber, recirculating quench-water pump, air-cooled heat exchanger, and induced-draft fan. The gas-handling system is designed to cool and condition a process stream containing steam, particulate matter, and carbon dioxide before routing the exhaust toward sequestration and/or atmospheric discharge. Condensed water is cooled and returned to the client’s water-storage system.

This equipment has been sold. Similar equipment available now is shown below.

Loading...