USED 160" (4.06M) 150" TRIM (3.81M)(UNCOATED) BELOIT PRINTING & WRITING PAPER MACHINE DESIGNED FOR COATED RAWSTOCK AT 33LB/3300 SQUARE FEET. MAKING BAXTER TEXT GRADE PAPERS AT 18600 FPM (548 MPM) FOR 30-33-40-45 GSM. VOITH CONVERFLO W-TYPE, HIGH TURBULENCE HEADBOX WITH A 156" DECKLE, 316L SOLID BAR STAINLESS CONSTRUCTION. ADDITIONAL SECTIONS INCLUDE:
PRESS:
- 1 EACH FIRST PRESS / SUCTION ROLL AT 158" DRILLED FACE BY 28" DIAMETR, CENTRIFUGALLY CAST, SSM, RUBBER COVERED BRONZE SHELL
- 1 EACH FIRST PRESS ROLL AT 160" FACE BY 26" DIAMETR, VERMONT GRANITE
- A EACH SECOND PRESS BOTTOM ROLL, VENTRA-NIP GROOVED ROLL AT 160" CAST IRON SHELL, BY 27.75" DIAMETR, RUBBER COVERED BRONZE SHELL
- 1 EACH SECOND PRESS TOP ROLL AT 160" FACE BY 2" DIAMETR, VERMONT GRANITE
- 12 EACH FELT ROLLS, ALUMINUM, 166" FACE X 8" DIAMETER
- 1 EACH AIR ROLL, ALUMINUM, 166" FACE X 8" DIAMETER
DRYERS:
- 36 EACH 158" FACE BY 60" DIAMETER, CAST IRON, ASME CODE, 450 DEGREES AT 75 PSI
- 1 EACH 158" FACE BY 24" DIAMETER, BABY DRYER, CAST IRON, ASME CODE, 450 DEGREES AT 75 PSI
- 20 EACH POCKET VENTILATION ROLLS
- 33 EACH 166" FACE BY 12" DIAMETER, FELT ROLLS, W.S. PIPE
- 23 EACH 166" FACE BY 10" DIAMETER, FELT ROLLS, W.S. PIPE
- 2 EACH 158" FACE BY 14" DIAMETER, PAPER ROLLS, TENSION DEVICE, W.S. PIPE
BREAKER PRESS:
- 1 BREAKER PRESS TOP ROLL, 152" (LOADED) FACE BY 28" DIAMETER, CHILLED IRON CORE
- 1 BREAKER PRESS BOTTOM ROLL, 152" (LOADED) FACE BY 22" DIAMETER, SPUNHARD CENTRIFUGALLY CAST, CHILLED IRON AT 70-75 SCLEROCCOPE HARDNESS SHELL, NON-DRIVEN CONTROLLED CROWN
- 1 BREAKER PRESS PAPER ROLL, 152" FACE BY 14" DIAMETER, W.S.PIPE
- 1 BREAKER TENSION ROLL, 152" FACE BY 14" DIAMETER, W.S.PIPE
CALENDER:
- 1 BOTTOM CALENDER ROLL, 152" LOADED FACE BY 22" DIAMETER, SPUNHARD CENTRIFUGALLY CAST, CHILLED IRON AT 70-75 SCLEROCCOPE HARDNESS SHELL, NON-DRIVEN CONTROLLED CROWN
REEL:
- 1 REEL DRUM, 154" BY 36" DIAMETER, CAST IRON.
- 8 REEL SPOOLS, 164" BY 16" DIAMETER, CAST IRON
- 2 REEL SPREADER ROLLS, 1 MOUNT HOPE, 1 PAPER ROLL
WINDER:
- BELOIT MODEL SUPER L-24-R-60, 154" FACE AND 148" MAXIMUM TRIM WIDTH BY 60" DIAMETER (REWOUND), 75" DIAMTER MAXIMUM (UNWIND)
- TWO DRUM AT 55OO FPM (1676 MPM) DESIGN SPEED
- LEFT HAND DRIVEN
- MINIMUM SLIT WIDTH, 9.5"
- REWOUND ROLL CORE I.D. 3"
- FIXED HEIGHT SPOOL TYPE MECHANICAL BRAKE
- SHAFTLESS UNWIND
- 11-12 SLITTER SECTIONS (8"-10" DIAMETER BLADES)
THE MACHINE WAS SHUT DOWN IN JANUARY OF 2005, NEW IN 1979 WITH VARIOUS REBUILDS AND UPGRADES OVER THE YEARS. WHEN STANDING AT THE WET END FACING THE DRY END OF THE MACHINE, THE DRIVE SYSTEM IS LOCATED ON THE LEFT-HAND SIDE.
