200 Tons/Day Beet Pulp Drying Complex Pulp Dryer Swidnica

Description

Used 200 Tonne/Day (DM Content 22%) Beet Pulp Drying Complex
From the Polish manufacturer SFUP (Świdnica, Poland)
Manufactured in 1981, but was in operation for fewer than 10 campaigns
Detailed specifications of drying equipment listed below:

- Combustion chamber
Diameter: 3400 mm
Length: 12000 mm
The furnace is manufactured from carbon steel with an inner fire-resistant brick lining

- Natural gas block burner
Delivery scope of the burner:
Natural gas burner manufactured by ELCO-KLOCKNER, for industrial use, modulating, with the ability to change the flame geometry
2-block execution type RPD 80 G-R

- Combustion air fan
Capacity: 38,000 m³/h
Motor: 100 kW

- Gas burner accessories
Gas pressure at the inlet: 3 bar
Gas pressure behind the regulator: 150 mbar

- Cabinet with control and safety equipment

- Fan for blowing air into the mixing chamber
Capacity: 80,000 m³/h
Pressure: 1600 Pa
Motor

- Drying drum
Nominal capacity for the dried beet pulp, with the DM content for the pressed pulp at the inlet 22%: 200 t/d
Diameter of the drum: 3400 mm
Length of the drum: 18,200 mm
Drive power: 55 kW

- Components of the drying drum:
Drum with supporting rings (girth gear) – 2 pcs.
Discharge chamber with discharge wheel – 1 pc.
Supporting frames with rollers – 2 pcs.
Drive with frame – 1 pc.
Sealing between the combustion chamber and drying drum – 1 pc.
Feeding chute – 1 pc.
Drum speed is infinitely adjustable in the range of 1–5 rpm
Drum material: carbon steel

- Cyclone block consisting of 2 cyclones
Height: 2 x 4,200 mm
Material: carbon steel

- Exhaust fan
Capacity: 250,000 m³/h
Pressure: 2000 Pa
Motor: 160 kW

- Rotary valve for discharge of dust from cyclone
Opening dimension: 300 x 300 mm
Height: 500 mm
Motor: 1.1 kW

- Feeding screw conveyor for pressed beet pulp
Diameter: 500 mm
Length: 4000 mm
Gearmotor: 7.5 kW

- Discharge screw conveyor for dried beet pulp
Diameter: 500 mm
Length: 6500 mm
Gearmotor: 7.5 kW

- Discharge screw conveyor for dried beet pulp
Diameter: 500 mm
Length: 6500 mm
Gearmotor: 7.5 kW