32mm Andritz Filter Press

Description

Certainly! Here's the text translated into British English:

---

New, never used Andritz polypropylene plate and frame filter press.
Model 1000/40
(24) 32mm chambers
Built 2012

- 24 Chamber Units
- Machine Type: 1000/HP/SR/24/32mm Filter Press
- Type: Closed Filtrate
- Number of Stay Bosses: 4
- Slurry Type: Iron Hydroxide
- Inlet Consistency: 3% TSS
- Cake Density: 83 lb/ft³
- Slurry Temperature: 65°C Max
- pH: 13
- Guaranteed Cake Solids: 52%
- Maximum Cycle Time: 120 minutes

- Size of Press: 1000 High Pressure
- Cake Thickness (Pre-Squeeze): 32mm
- Number of Chambers: 24
- Filter Area: 417 ft²
- Capacity: 0.5352 m³ / 19 ft³
- Pack Length: 183.92 cm
- Weight of Empty Press: 10.89 tonnes
- Hydraulic Unit: 5 HP
- Power Supply: 575 V, 3-Phase, 60 Hz
- Plate Material: Polypropylene
- Slurry Feed Pressure (Max at 75°C): 65 psi @ 75°C
- Squeeze Pressure (Max at 75°C): 141 psi @ 75°C
- Flooded Weight of Machine: 11.74 tonnes

· Filter Cloths
- Composition: Polypropylene
- Weight: 318.76 grams/m²
- Caliper: 0.46 mm
- Porosity: 3–5 CFM
- Thread Count: 107 x 36
- Warp Yarn: Monofilament Black
- Filling Yarn: Multifilament
- Finish: Heat Set & Calendared
- Style: AFP 101
- Attachment: Plastic Tie

· Hydraulic Power Pack
- Nominal Motor Rating: 5 HP
- Voltage: 575 volts
- Piston Diameter: 254 mm
- Piston Rod Diameter: 127 mm
- Piston Stroke (Maximum): 762 mm
- Tank Volume: 113.57 litres
- Pump Conveying Stream, 4500 psi: 18.93 litres/minute
- Pump Conveying Stream, 4500 psi: 8.71 litres/minute
- Motor Speed: 1750 RPM
- Enclosure: IP55

---

Note: Units such as psi and feet are retained as per original, but metric units and spellings adapted to British English (e.g., litres vs. liters, tonnes vs. tons). If you require full metric conversion, please advise.