Line For Packaging Liquid Products Into Plastic Bottles With Dose Of Up To 750 Ml Manufactured By Tang Og Weiss As

Description

Second-hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml.

Working output of line:
- for bottles with a volume of 750 ml – up to 600 pcs/hr
- for bottles with a volume ranging from 200 to 400 ml – between 800 and 900 pcs/hr
- for smaller volume bottles, it is possible to estimate a capacity in the range of 1000 to 1200 pcs/hr.

The line consists of:
- Bottle container produced by PACKFEEDER S.L. (Spain), model MN 100-4,

- Filling and closing unit manufactured by TANG OG WEISS AS (DK), model TWKS. It includes a filling module by TANG OG WEISS AS, model TWRF, with two filling nozzles, a stainless steel buffer tank with a total volume of 15 litres, rotary table, caps feeder, arm for capping/cap tapping, and plate conveyor,

- Stainless steel lobe pump manufactured by SSP PUMPS (England), model L2-0017, for feeding the product to the buffer tank,

- Labelling unit by EME Etiketteringsmaskiner ApS (Denmark), model 4-120 (4000 series) without printer, equipped with a plate conveyor and two self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min,

- Automatic packaging machine in heat-shrink film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany), model ASK 450. The device wraps packages of six bottles with film and thermoforms them. The entrance opening to the shrink film section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation),

- Plate conveyors and control panels.

The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer’s documentation in Danish and a user manual in Polish. The line was produced in 2007.