500 l Beer Brewery System

Description

Used beer brewery system (block brewery) with a total volume of 550 litres and a nominal volume of 500 litres. The brewery is designed as a block connected to a stainless steel frame and steps. The unit consists of:

1. Stainless steel vessel – lauter tun with level meter. The vessel is equipped with a stirrer, with the ability to change the rpm via a frequency converter. The height of the stirrer is adjustable.

2. Stainless steel vessel – mash tun, which is also used as a whirlpool tank. The vessel is equipped with a tangential nozzle for filling the wort, as well as a jacket for possible pre-cooling of the wort (waste heat can be used to heat water, and the jacket can be connected to a heating system up to 1.5 bar). The tank is equipped with a stirrer, with the ability to change the speed via a frequency converter. The height of the stirrer is adjustable.

3. Alfa Laval pump, which is controlled by a frequency converter.

4. Alfa Laval two-stage cooler designed to cool 500 litres of wort from 99 °C to 12 °C per hour.

5. Pipes for steam extraction, chimneys with shut-off valves.

6. Control is possible in manual or semi-automatic mode via the touchscreen (in the case of adding recipes, it is possible to use fully automatic control for mashing). The brewery control application can be installed on a portable device (e.g. a tablet), and control can be performed via remote access.

The brewery can be connected to the following media: electrical power consumption minimum 20 kW, hot water 1", cold water 1", compressed air minimum 5 bar, inlet for CIP DN40, combustion DN40. The brewery includes a measuring instrument verified by the Czech Metrology Institute with the necessary certification verification.