Котел Водотрубний тип

USED 750 HP CLEAVER BROOKS FIRETUBE BOILER, MODEL CB400-700, WAS ORIGINALLY CONSTRUCTED IN 1971 IS STRICT ACCORDANCE WITH THE ASME CODE, SECTION I, FOR A DESIGN PRESSURE OF 150 PSIG. THE UNIT IS A FOUR (4) PASS DRYBACK DESIGN WITH 2,500 SQUARE FEET OF FIRESIDE HEATING SURFACE. THE SHELL IS INSULATED WITH (2) INCHES OF COMPRESSED FIBERGLASS AND COVERED WITH A HEAVY GAUGE SHEET STEEL CASING. THE FULLY MODULATING FORCED DRAFT BURNER IS INTEGRALLY MOUNTED, PIPED AND WIRED ON THE BOILER FRONT ALLOWING FOR EASE OF FLAME OBSERVATION, SET-UP AND MAINTENANCE. IN ADDITION TO THE STANDARD FACTORY TRIM THIS SYSTEM IS EQUIPPED WITH: -PRIMARY & SECONDARY LOW WATER CUT-OFFS -FEEDWATER STOP & CHECK VALVING -BLOWDOWN, BLOWOFF, VENT & SAFETY VALVES -WATER COLUMN WITH SIGHT GLASS, GAUGE COCKS, TRICOCKS & BLOWDOWN VALVES -FRONT & REAR HINGED COVERS -PRESSURE GAUGE & STACK THERMOMETER -BOILER/BURNER CONTROL CENTER CONSISTING OF THE PRIMARY FLAME CONTROL & DECTECTOR, MOTOR STARTERS, RELAYS, LIMIT SWITCHES, ALARM BELL, INDICATING LIGHTS, CONTROL CIRCUIT TRANSFORMER & MANUAL POTENTIOMETER -AIR COMPRESSOR WITH LUBE OIL TANK & COOLER -FUEL PUMP AND DRIVE, SHIPPED LOOSE -STEAM/ELECTRIC FUEL OIL PREHEATER, MOUNTED, PIPED & WIRED -IRI AND FM INSURANCE APPROVALS, U.L. LABELING -NATIONAL BOARD CERTIFIED