USED 189" (4.8M) VOITH/BELOIT PAPER MACHINE CONSISTING OF THE FOLLOWING:
PAPER MACHINE CAPABILITIES:
PRODUCT MIX:
LIGHTWEIGHT COATED FREESHEET
FILMCOAT AND #3 AND #4 CFS
BASIS WEIGHT 28 TO 60 #/3300 SQ.FT.(25X38)
USED IN PUBLICATION OF MAGAZINES AND PPI DRIVEN TEXTBOOKS
LIGHTWEIGHT UNCOATED FREESHEET
OPAQUE AND PACKAGING GRADES
BASIS WEIGHT 27 TO 60#/ 3300 SQ.FT.
BEST RANGE 27 TO 50#
USED IN FINANCIAL PUBLICATIONS AND PACKAGING
PRODUCTIVITY:
• AVERAGE WINDER PRODUCTION 350 TONS PER DAY
TRIM:
• WIDTH AT REEL = MAX. 180 INCHES
• OFF-WINDER TRIM = MAX. 176 INCHES
SPEED:
• 1990'S REBUILD ELEMENTS BALANCED AT 3500 FPM
• 1968 ORIGINAL EQUIPMENT BALANCED AT 2500 FPM
• MAXIMUM SUSTAINED SPEED 3343 FPM
REBUILD HISTORY:
• DRY END 1995
• - $40MM
• PROVIDED COATING CAPABILITY WITH GATE ROLL COATER, GAW COATING KITCHEN AND SOFT NIP CALENDAR
• WET END 1999
• - $55MM
• INCREASED MACHINE SPEED FROM 2400 FPM TO 3300 FPM
• INSTALLED HYDRAULIC HEADBOX, TOP FORMER, REBUILT PRESS
INCLUDING NIPCOFLEX SHOE PRESS 3`° PRESS, DRYER SECTION
UNIRUN AND SERPENTINE MODIFICATIONS
MAJOR COMPONENTS:
PAPER MACHINE 14
• HEADBOX
VOITH (1998) HYDRAULIC DILUTION SW 10000 - MODULE JET
• 77 MODULES
• 194" POND
• FOURDRINIER
BELOIT (1968) _.
FABRIC WIDTH 199.5"
28" DIA. BREAST ROLL
28.5 " DIA FORWARD DRIVE ROLL
36" DIA. SUCTION COUCH ROLL
• TOP FORMER
VOITH (1998) DUOFORMER `D'
FABRIC WIDTH 201"
1 - 19 BLADE 3 ZONE TOP DEWATERING BOX
1 - 10 BLADE BOTTOM FORMING BOX
1 - SUCTION TRANSFER BOX
• PRESS SECTION
BELOIT (1968) 26" SUCTION PICK UP
VOITH (1998) CENTRE PRESS (I" AND 2"D)
• BELOIT (1968) 36" LS`'PRESS SUCTION ROLL - 450 PLI
• 43.3" CERAMIC CENTRE PRESS ROLL
• 25.8" NIPCO `F' 2"° PRESS ROIL - 500 PLI
VOITH (1998) NIPCOFLEX SHOE PRESS 3`D PRESS
• 41.4" NIPCO `P' TOP ROLL - 4500 PLI
• 50.0" NIPCOFLEX ROLL, POLY SLEEVE
ROLLS
• 5 - 16.5" FELT ROLLS
• 11 - 14.5" BELOIT (1968) FELT ROLLS
• 1 - 21.65" LEAD IN SUCTION FELT ROLL
• 2 - 16.1" CHROME TEFLON PAPER ROLLS
• MAIN DRYER SECTION
TOTAL 34 - BELOIT DRYERS (1968) - 75 PSIG
60" DIA. X 192" FACE
UNIRUN (DRYERS 1-3)
• 4 CANS, 1 SHEET TRANSFER FOIL BOX
• 3 VOITH (1998) DRYER FABRIC ROLL (39.3" DIA.)
• 3 VOITH DUOSTABIZER BOXES (1998)
SERPENTINE (DRYERS 4-10)
• 3 TOP CANS, 3 BOTTOM CANS (NO STEAM)
• 3 VOITH (1998) `S' STABILIZER BOXES
TWO-TIER SECTIONS
• 2 DOUBLE-FELTED SECTIONS OF 12 CANS EACH
AQUATROL MOISTURE PROFILER
PAPRIMA TAIL CUTTER (1995)
• PRE-CALENDER
BELOIT (1982) TWO ROLL HARD STACK
• 28" DIA. FIXED CROWN TOP (QUEEN) ROLL
• BELOIT (1968) 24.5" DIA. MOVEABLE CONTROLLED CROWN
BOTTOM (KING) ROLL
• TRANSFER ROLL COATER / SIZE PRESS
IHI (1995) GATE ROLL COATER
• 42.9" APPLICATOR ROLLS - URETHANE COVERS
• 33.9" INNER ROLLS, HARD CHROME
• 29.9" OUTER ROLLS R.C.
• ALL ROLLS DRIVEN
IHI AIRTURN (1995)
INFRARED DRYERS
• IMPACT
• GAS 4 ROWS TOP AND BOTTOM
• NON-PROFILING
• AFTER DRYER SECTION
TOTAL 11 - BELOIT DRYERS (1968) - 75 PSIG
60" DIA. X 192" FACE
TWO-TIER DOUBLE FELTED
CLOSED HOOD
PAPRIMA TAIL CUTTER (1995)
• ELECTRIC INFRARED DRYERS
IMPACT
ELECTRIC TOP ONLY
PROFILING
• SOFT NIP CALENDER
SULZER (1995)
• SNC1
• 28" HARD NIPCO ROLL (REMOVED)
• 40" FLEXITHERM ROLL
• 26.1" SOFT NIPCO ROLL - BOTTOM SIDE
• SNC2
• 26.1" SOFT NIPCO ROLL- TOP SIDE
• 40" FLEXITHERM ROLL
• REEL
BELOIT (1968) LEVEL RAIL
36" DIA. DRUM 190" FACE
• DRIVES
ABB (1995 AND 1999)
• VARIABLE FREQUENCY AC ELECTRIC
• MAX. SPEED 3500 FPM
ABB (1999)
• SECTIONAL DC ELECTRIC DRIVE HEAD BOX FAN PUMP
• CONTROL. SYSTEMS
QCS VALMET DAMATIC XD - VINTAGE 1993
• OPERATOR CONSOLES AT DRY END AND WET END
• SIZE PRESS AND REEL SCANNERS: BASIS WEIGHT, MOISTURE,
CALIPER, ASH, COLOUR, FORMATION, GLOSS AND OPACITY
• CD CONTROL ACTUATORS
• BASIS WEIGHT (DILUTION HEADBOX)
• CALIPER (CALCOIL - PRECAL)
• MOISTURE (AQUATROL - MAIN DRYERS, IMPACT
ELECTRIC IR - AFTER DRYERS)
• GLOSS (2 CALCOILS - 1 ON EACH SOFT NIP
CALENDER)
PAPER MACHINE AND STOCK PREP DCS - MOORE APACS
COATING KITCHEN DCS - GAW PC BASED
• SPARES
EXTENSIVE LIST OF SPARE ROLLS (SEE ATTACHED LIST)
NEW MACHINE CLOTHING, --43 PIECES
STOCK PREPARATION, THIN STOCK AND COATING KITCHEN
• PULPING
VIRGIN PULP
• 2 BLACK CLAWSON KENNEDY HYDRAPULPERS (1968)
• 2 CRANSTON BALE CONVEYORS
SECONDARY PULP (EXCLUDED FROM THIS OFFERING)
• SEE EXCLUSIONS BELOW
• REFINING -
1 BELOIT JONES DD 3234 REFINER
1 BELOIT JONES DD 4334 REFINER
SEE EXCLUSIONS BELOW
• THIN STOCK
VOITH VPS THIN STOCK SCREENS, PRIMARY, SECONDARY AND TERTIARY
VOITH VPS DILUTION SCREEN
BAUER CENTRICLEANERS, PRIMARY, SECONDARY AND TERTIARY
CELLECO FOURTH STAGE AND RCC CENTICLEANERS
BELOIT POLYDISK SAVEALL
• COATING KITCHEN
GAW (1995)
1 BATCH DISPERSER
40 MINUTE BATCH TIME
2500 GAL/HR
VARIOUS SYSTEMS FOR UNLOADING AND STORING RAW MATERIALS
FROM TRUCKS AND RAIL.
SEE EXCLUSIONS BELOW.
ROLL FINISHING
• BELOIT SALVAGE WINDER
RETROFITTED W/JAGENBERG BACKSTAND
ON MAX 90" MIN 8"
OUT MAX 70" MIN 8"
DIAMETER MAX 60" MIN 15"
KNIVES MAX 11 MIN 2
• ROLL WRAPPING
ROLL WRAP LINE - LAMB EXTENSIVELY MODIFIED BY RLA
WEIGH STATION
ROLL CENTERING STATION
WRAPPER APPLICATOR STAND
WRAPPER CRIMPING STATION
HOT GLUE APPLICATOR
HEATED PLATEN HEADER PRESS
MANUAL APPLICATION OF HEADERS AND LABELS
ROLL DIAMETER: 24" MIN./60" MAX.
ROLL WIDTH: 15" MIN./96" MAX.
ROLL WEIGHT: 300# MIN./10,000# MAX.
DESIGN RATE: 60 PKG5,/HR.
THE OFFERING INCLUDES ALL SPARE PARTS DIRECTLY ASSOCIATED WITH THE MACHINE ARE INCLUDED AS PART OF THE SALE THAT IS SPECIFIC TO PAPER MACHINE IS INCLUDED. EXAMPLE: BELOIT OR VOITH OR VALMET PARTS.
ALSO INCLUDED ARE ALL SPARE ROLLS FOR THIS MACHINE. A FULL INVENTORY LISTING TO BE PROVIDED UPON INSPECTION.
SPARE CLOTHING - OVER $1 MILLION WORTH OF NEW SPARE MACHINE CLOTHING IS ALSO INCLUDED IN THE OFFERING.
EXCLUSIONS FROM THIS OFFERING:
- VALMET (1992) KL1000 WINDER, INCLUDING DRIVES AND ALL ASSOCIATED EQUIPMENT SINCE THE MILL GROUP IS PLANNING ON RELOCATING IT TO ANOTHER FACILITY.
- ''GENERIC'' TYPE SPARES FROM THE STORES AND TRANSFERRING THEM TO OTHER MILLS (EX: VALVES, FLEXIBLE JOINTS, NUTS & BOLTS, ELECTRICAL ETC)
