Młyny do pelletowania

USED MUENCH PELLET MILL SYSTEM CONSISTING OF: (1) VECOPLAN INCLINED FEED CONVEYOR, APPROXIMATELY 60" WIDE X 26' LONG, APPROXIMATELY 168" DISCHARGE HEIGHT, DRIVEN BY 5 HP GEAR MOTOR, (1) ENSIGN DOSING HOPPER, APPROXIMATELY 84" WIDE X 108" LONG X 84" DEEP; 16" DIAMETER X 11' LONG. DRIVEN BY 5 HP MOTOR WITH REDUCER, (1) VECOPLAN INCLINED CONVEYOR TYPE KKF-820-2K-U, S/N 13012-210. APPROXIMATELY 32" WIDE X 84" LONG BOTTOM HORIZONTAL SECTION X 30' LONG INCLINED SECTION, DRIVEN BY 5 HP GEAR MOTOR, (1) ROTARY DRUM MAGNET WITH GEAR MOTOR AND DISCHARGE CHUTE, (1) MUENCH DENSIFIER, APPROXIMATELY 60" DIAMETER X 60" DEEP, BOTTOM BLADE DRIVEN BY APPROXIMATE 5 HP MOTOR. (1) MUNCH RING DIE PELLET MILL, MODEL RMP660/178, S/N 2011-40925. BUILT 2012. CARBON STEEL. (2) APPROXIMATELY 12-1/2" DIAMETER X 7-1/8" FACE ROLLERS, APPROXIMATELY 26" INSIDE DIAMETER DIE WITH APPROXIMATELY 3/8" DIAMETER HOLES. EACH ROLL DRIVEN BY 110 KW MOTOR. TOP MOUNTED PRE-CONDITIONING FEEDER DRIVEN BY 3 KW MOTOR GEAR MOTOR, CONDITIONING FEEDER DRIVEN BY 7.5 KW MOTOR,, HINGED FRONT DOOR WITH DISCHARGE CHUTE AND BAR FEEDER DRIVEN BY 1.1 KW MOTOR, INCLUDES AUTO GREASER. (1) VECOPLAN INCLINED CONVEYOR, TYPE VFB-800-F2, S/N 13012-240. APPROXIMATELY 32" WIDE X 72" LONG BOTTOM HORIZONTAL SECTION X 30' LONG INCLINED SECTION, DRIVEN BY 5.5 KW GEAR MOTOR, (1) MUNCH PELLET COOLER, MODEL SDCC10. TOP FEED WITH ROTARY VALVE, SIDE ACCESS DOOR, HYDRAULIC OPERATED BOTTOM SLATS WITH POWER PACK, 30 HP BLOWER, AND CYCLONE. (1) VECOPLAN INCLINED CONVEYOR, TYPE VFB-800-F2, S/N 13012-260. APPROXIMATELY 32" WIDE X 120" LONG BOTTOM HORIZONTAL SECTION X 10' LONG INCLUDED SECTION, DRIVEN BY 3 KW GEAR MOTOR. INCLUDES CONTROL PANELS.