Machines à papier, diverses

ONE (1) USED MODEL AX270FB63, 70', 63 DEGREE, 60 TON CAPACITY, EXTENDED ARM TRUCK DUMPER, WITH CONTROL PANEL (2) 75 HP, 1750 RPM MOTORS, DEVICES, PLC'S, RELAYS, ETC. ARE BY OTHERS) WITH DUMPER ENCLOSURE ASSEMBLY, INCLUDING THE FOLLOWING OPTIONS: - JIC, SAE HYDRAULIC COMPONENTS AND ISOLATION VALVES - EXTERNAL, EASILY REMOVABLE, VALVED 10 MICRON SUCTION LINE FILTERS - EASILY REMOVABLE, VALVED, 10 MICRON RETURN LINE FILTERS - 9KW IMMERSION HEATING ELEMENT IN THE HYDRAULIC RESERVOI - HIGH OIL TEMPERATURE SWITCH - LOW OIL LEVEL SWITCH - HIGH SUCTION VACUUM SWITCH (INCLUDED IN STRAINER AND FILTERS) - WALKWAY AND HANDRAIL ON PASSENGER'S SIDE EXTENDING BACK TO YOKE ARM - ALL NECESSARY PIPE, PIPE SUPPORTS, ANCHORS AND GUIDES (DUMPER AND HOPPER) - TWO (2) RETAINING HOOPS; (1) MOUNTED OVER THE "A-FRAMES"; (1) MOUNTED FURTHER UP THE DECK - FIXED ADJUSTABLE HEIGHT BACKSTOP ONE (1) USED MODEL W-G-70-12-11.5-39-40 LIFE FLOOR (RECIPROCATING TYPE) HOPPER. HOPPER SHALL HAVE A HOLDING CAPACITY OF APPROXIMATELY 6,500 CUBIC FEET AND A CONVEYING RATE OF 150 TONS PER HOUR OF 10-15 LB/FT CUBED LOOSE DENSITY MATERIAL, INCLUDING THE FOLLOWING OPTIONS: - DOOR AND WINDOW IN HOPPER - (2) 12 FT WIDE FLOORS X 35 FT LONG, EACH HAVING ITS OWN 40 HP HYDRAULIC POWER UNIT WITH VARIABLE VOLUME, PRESSURE COMPENSATING PUMPS (LESS 2 - 40 HP, 1750 RPM MOTORS). COMPONENTS TO BE JIC. - HOPPER CLOSURE ASSEMBLY TO COVER THE HOPPER WHILE THE DUMPER IS DOWN. IT WILL RAISE AS THE DUMPER IS RAISED IN ORDER TO RECEIVE MATERIAL INTO THE HOPPER. - EXTERNAL, EASILY REMOVABLE, VALVED, 10 MICRON SUCTION LINE FILTERS - EASILY REMOVABLE, VALVED, 10 MICRON RETURN LINE FILTERS - HIGH OIL TEMPERATURE SWITCH - LOW OIL LEVEL SWITCH - HIGH SUCTION VACUUM SWITCH (INCLUDED IN STRAINER AND FILTERS) - ADDITIONAL PUMP ON EACH POWER UNIT AS A BACK-UP (LESS 2 - 40 HP, 1750 RPM MOTORS) - 1/4 INCH HOPPER SIDE WALLS IN LIEU OF 10 GAUGE - TWO (2) EACH AIR TO OIL TYPE HEAT EXCHANGERS - ALL PIPE, PIPE SUPPORTS, ANCHORS AND GUIDES