USED FILTECO MICROFIL WRAP DRAW BULK CONTINUOUS FILAMENT LINE, CONSISTING OF THE FOLLOWING:
ONE (1) 2000 PROCESS CONTROL PUSH/PULL VACUUM PUMP MODEL VE05YNDNU, S/N 00163001, W/ 5-HP ELECTRIC MOTOR AND PROCESS DIRECTOR CONTROLS
ONE (1) PROCESS CONTROL 4-ELEMENT BLENDER, MODEL XDECYULLJE, W/ SERIES XB CONTINUOUS GRAVIMETRIC BLENDER, W/ PROCESS CONTROLS DIGITAL CONTROL PANEL
ONE (1) EXTRUDER W/ 60MM DIAMETER SCREW, 30-1 L/D RATION, (6) HEATING ZONES, 180KW MOTOR, RATED AT 400-LBS./HOUR, W/ (1) EXTRUDER CONTROL PANEL
ONE (1) 2001 KREYENBORG PNEUMATIC SCREEN CHANGER, TYPE K-SWE-100, S/N 19313/D
ONE (1) PROCESS CONTROL 4-ELEMENT BLENDER, MODEL XDECYULLJE, W/ SERIES XB CONTINUOUS GRAVIMETRIC BLENDER, W/ PROCESS CONTROLS DIGITAL CONTROL PANEL
ONE (1) EXTRUDER W/ 60MM DIAMETER SCREW, 30-1 L/D RATION, (6) HEATING ZONES, 180KW MOTOR, RATED AT 400-LBS./HOUR, W/ (1) EXTRUDER CONTROL PANEL
ONE (1) 2001 KREYENBORG PNEUMATIC SCREEN CHANGER, TYPE K-SWE-100, S/N 19313/D
ONE (1) HAWE HYDRAULIC PUMP (FOR THE SCREEN CHANGERS), TYPE R2.8/B 6-Z 1.5-A/300
ONE (1) SPINNER PACK MANIFOLD W/ (6) ISGEV MOTORS, W/ 6-SPINNER PACK CHAMBERS CAPABLE OF FITTING (12) SPINNER PACKS, (1) BACK TO BACK DOUBLE-QUENCH AIR COOLED CABINET, (1) FUME VACUUM W/ LANCER GPD 502 MAGNETEK DIGITAL CONTROLS, 5-HP MOTOR, W/ ASSOCIATED DOWN SPOUTS.
ONE (1) 6-PUMP FINISHING SYSTEM W/ CONTROLLER
ONE (1) ENERPAC PNEUMATIC BOTTOM MOUNT SPINERETTE PACK LOADER
ONE (1) 2000 FCR CALDAIE HOT OIL HEATER, 25-LITER CAPACITY, 350 DEGREE CELSIUS TEMPERATURE, W/ D.P.M. CONTROLS, 7.5-HP MOTOR, W/ APPROXIMATELY 40-GALLON OIL STORAGE RESERVOIR.
ONE (1) 2000 MONTAIR AIR TREATMENT UNIT, MODEL UT 5000/SX W/ ASSOCIATED CONTROLS
ONE (1) 2000 MONTAIR AIR TREATMENT UNIT, MODEL UT 5000/SX W/ ASSOCIATED CONTROLS
ONE (1) 2000 FILTECO MICROFIL WRAP/DRAW BULK CONTINUOUS FILAMENT PLANT W/ (2) 220MM DIAMETER FEED ROLLS, (3) 200MM DIAMETER HEATER PRE-TENSION GODETS, (5) 500MM DIAMETER HEATING DRAWING GODETS, 3-ZONE THERMOREGULATION TEMPERATURE CONTROL, (3) WRAP REMOVAL UNITS, FOUR POLYPROPYLENE POLYMER SINGLE COLOR 24 END, W/ POWER DISTRIBUTION CONTROL PANEL, 200-ROLL TEMPERATURE CONTROL PANEL, 500-ROLL TEMPERATURE CONTROL PANEL, INDIVIDUAL TEXTURIZER HEATER CONTROL PANEL, (1) TRN VACUUM SYSTEM
ONE (1) 12-STATION DRAW FRAME W/ (12) COMPRESSED AIR ENGTANGLEMENT STATIONS (PLEASE NOTE: SOME INCOMPLETE), (12) WINCO AUTO DOFFING WINDERS MODEL F3001-FT W/ (2) TAKE OFF ROLL SYSTEMS EACH
ONE (1) PROCESS CONTROL 4-ELEMENT BLENDER, MODEL XDECYULLJE, W/ SERIES XB CONTINUOUS GRAVIMETRIC BLENDER, W/ PROCESS CONTROLS DIGITAL CONTROL PANEL
ONE (1) EXTRUDER W/ 60MM DIAMETER SCREW, 30-1 L/D RATION, (6) HEATING ZONES, 180KW MOTOR, RATED AT 400-LBS./HOUR, W/ (1) EXTRUDER CONTROL PANEL
2001 KREYENBORG PNEUMATIC SCREEN CHANGER, TYPE K-SWE-100, S/N 19313/D
ONE (1) PROCESS CONTROL 4-ELEMENT BLENDER, MODEL XDECYULLJE, W/ SERIES XB CONTINUOUS GRAVIMETRIC BLENDER, W/ PROCESS CONTROLS DIGITAL CONTROL PANEL
ONE (1) EXTRUDER W/ 60MM DIAMETER SCREW, 30-1 L/D RATION, (6) HEATING ZONES, 180KW MOTOR, RATED AT 400-LBS./HOUR, W/ (1) EXTRUDER CONTROL PANEL
ONE (1) 2001 KREYENBORG PNEUMATIC SCREEN CHANGER, TYPE K-SWE-100, S/N 19313/D
ONE (1) HAWE HYDRAULIC PUMP (FOR THE SCREEN CHANGERS), TYPE R2.8/B 6-Z 1.5-A/300
ONE (1) SPINNER PACK MANIFOLD W/ (6) ISGEV MOTORS, W/ 6-SPINNER PACK CHAMBERS CAPABLE OF FITTING (12) SPINNER PACKS, (1) BACK TO BACK DOUBLE-QUENCH AIR COOLED CABINET, (1) FUME VACUUM W/ LANCER GPD 502 MAGNETEK DIGITAL CONTROLS, 5-HP MOTOR, W/ ASSOCIATED DOWN SPOUTS
ONE (1) 6-PUMP FINISHING SYSTEM W/ CONTROLLER
ONE (1) ENERPAC PNEUMATIC BOTTOM MOUNT SPINERETTE PACK LOADER
ONE (1) 2000 FCR CALDAIE HOT OIL HEATER, 25-LITER CAPACITY, 350 DEGREE CELSIUS TEMPERATURE, W/ D.P.M. CONTROLS, 7.5-HP MOTOR, W/ APPROXIMATELY 40-GALLON OIL STORAGE RESERVOIR
ONE (1) 2000 MONTAIR AIR TREATMENT UNIT, MODEL UT 5000/SX W/ ASSOCIATED CONTROLS
ONE (1) 2000 MONTAIR AIR TREATMENT UNIT, MODEL UT 5000/SX W/ ASSOCIATED CONTROLS
ONE (1) 2000 FILTECO MICROFIL WRAP/DRAW BULK CONTINUOUS FILAMENT PLANT W/ (2) 220MM DIAMETER FEED ROLLS, (3) 200MM DIAMETER HEATER PRE-TENSION GODETS, (5) 500MM DIAMETER HEATING DRAWING GODETS, 3-ZONE THERMOREGULATION TEMPERATURE CONTROL, (3) WRAP REMOVAL UNITS, FOUR POLYPROPYLENE POLYMER SINGLE COLOR 24 END, W/ POWER DISTRIBUTION CONTROL PANEL, 200-ROLL TEMPERATURE CONTROL PANEL, 500-ROLL TEMPERATURE CONTROL PANEL, INDIVIDUAL TEXTURIZER HEATER CONTROL PANEL, (1) TRN VACUUM SYSTEM
ONE (1) 12-STATION DRAW FRAME W/ (12) COMPRESSED AIR ENGTANGLEMENT STATIONS (PLEASE NOTE: SOME INCOMPLETE), (12) WINCO AUTO DOFFING WINDERS MODEL F3001-FT W/ (2) TAKE OFF ROLL SYSTEMS EACH
ONE (1) 2001 MONTAIR CHILLER, MODEL RH-2X35, REFRIGERANT TYPE R22, S/N 1100901, W/ APPROXIMATELY 120-GALLON INSULATED STORAGE TANK
ONE (1) TRANE AIR HANDLER/CLIMATE CHANGER, W/ MIXING BOX MODULE, FILTER SECTION MODULE, MEDIUM COIL MODULE, FAN SECTION MODULE, MCC UNIT, W/ TRANE DIGITAL CONTROLS
ONE (1) MARLEY AQUATOWER COOLING TOWER, S/N 603878A, BELT SIZE 2B-148, W/ (1) TACO LP PUMP W/ 15-HP ELECTRIC MOTOR
ONE (1) 3-TIER MEZZANINE SYSTEM
