Ligne d'extrusion de feuilles

USED ER-WE-PA (NOW OWNED BY DAVIS STANDARD) MULTI-LAYER BARRIER SHEET LINE, MANUFACTURED 1985, INCLUDING THE FOLLOWING: PRIMARY IS AS FOLLOWS: - EXTRUDER A: 2.5" 30:1 NON-BARRIER MADDOX MIXER ER-WE-PA, 40 HP, RELIANCE ELECTRIC - EXTRUDER B: 2.5" 30:1 NON-BARRIER MADDOX MIXER ER-WE-PA, 40 HP RELIANCE ELECTRIC - EXTRUDER C: 2" 30:1 BARRIER NO MIXER DAVIS STANDARD, 40 HP RELIANCE ELECTRIC - EXTRUDER D: 2.5" 30:1 NON-BARRIER MADDOX MIXER ER-WE-PA, 150 HP RELIANCE ELECTRIC - ER-WE-PA (EDI) DESIGN COAT HANGER DIE STANDARD APPROXIMATELY 60" - MELT PUMP FOR EXTRUDER E, DESIGNED FOR 3.5" EXTRUDER (POSSIBLY DYNISCO, MORE DETAILS AVAILABLE) - LAMINATED FEED BLOCK DESIGNED FOR BARRIER TYPE PRODUCTS FOR ABOVE EXTRUDERS - CHROME STACK ER-23-PA 62" X 500MM BOTTOM (CHROME), 500MM MID (CHROME), 400MM TOP (CHROME), INCLUDES OPTIONAL AIR KNIFE, ALSO INCLUDES 62" X 10" COOLING CAN - HAUL OFF PLATED ROLL AGAINST BUNA N COVERED 90 DUROMETER 8" X 62" - FRAME TO TRANSPORT SHEET TO SECONDARY - EUROTHERM HEAT CONTROL CONSOLE (COMPUTER/MICROPROCESSOR BASED) - PRIMARY OPERATOR CONTROL CONSOLE - HOPPER ALARM PANEL SECONDARY IS AS FOLLOWS: - EXTRUDER F: 3.5" 30:1 NON-BARRIER MADDOX MIXER ER-WE-PA, 150 HP RELIANCE ELECTRIC - EXTRUDER G: 3.5" 30:1 NON-BARRIER MADDOX MIXER ER-WE-PA, 150 HP RELIANCE ELECTRIC - LAMINATED FEED BLOCK CARTRIDGE TYPE FOR AB ABA STRUCTURES - ER-WE-PA (EDI) DESIGN COAT HANGER DIE STANDARD APPROXIMATELY 60" - CHROME STACK ER-WE-PA 62' X 500MM BOTTOM (CHROME), 500MM MID (CHROME), 400MM TOP (HYPALON), INCLUDES OPTIONAL AIR KNIFE, ALSO INCLUDES 62" X 10" COOLING CAN - EGS SYSTEM 21 BETA GAGE AND CONTROL CONSOLE - SLITTER STATION (RAZOR BLADE TYPE) COMBINED WITH THE SECONDARY HAUL OFF PLATED ROLL AGAINST BUNA N COVERED 90 DUROMETER 8" X 62" - WINDER OVERHEAD FRAME AND IDLER ROLLS PRE-WINDER TRANSPORT - HOME BREW DRUM TYPE WINDER MOTORS - ER-WE-PA CANTILEVER WINDERS (3) TOTAL - SECONDARY OPERATOR CONTROL CONSOLE - APPROPRIATE SUPPORT CONTROL CABINETS LINED UP BEHIND LINE APPROXIMATELY 60' LONG