Paper Machines

USED 102" (2.59M) WIDE, 85” (2.15M) TRIM FOURDRINIER PAPER MAKING MACHINE DESIGNED TO PRODUCE PRESSURE (ADHEISIVE) SENSITIVE PAPERS AT 46LB (PRESSURE SENSITIVE LABEL), 60LB (PRESSURE SENSITIVE RELEASE LINER), AND 72LB (LREP MASTER PAPER) AT BETWEEN 65 AND 85 TONS PER DAY AND A MAXIMUM SPEED OF 1255FPM (382MPM). THE MACHINE WAS ORIGINALLY MAKING PRINTING AND WRITING GRADES PRIOR TO RE-ENGINEERING TO MANUFACTURE SIZED PAPER FOR A VARIETY OF FACE SHEETS WHICH WERE USED FOR PRESSURE SENSITIVE LABEL STOCK. IN ADDITION, TWO SPECIALTY GRADES WERE BEING MADE ON THIS MACHINE WITH AN AVERAGE DECKLE OF 83" (2.10M). THE MACHINE IS A 1978 INSTALLATION. STOCK PREP INCLUDES: -1 EACH BELOIT 24" DD REFINER WITH A 500HP MOTOR -2 EACH CLAFLIN 303 SERIES REFINERS WITH 250 AND 500 HP MOTOR RESPECTIVELY -1 EACH JORDAN REFINER WITH A 350 HP MOTOR -1 EACH 3 STAGE SPROUT BAUER 606-H SERIES CENTRI-CLEANERS -1 EACH 24P BLACK CLAWSON SELECTIFIER, HEADBOX SCREEN THE MACHINE IS EQUIPPED WITH A VOITH TRYPE "W" HYDRAULIC HEADBOX THAT WAS NEW IN 1978. THE FORMING SECTION IS MADE UP OF A FOURDRINIER WITH A 24" DIAMETER DANDY ROLL. THE PRESS SECTION WAS MANUFACTURED B MANCHESTER MACHINE WITH A SUCTION ROLL IN THE FIRST PRESS SECTION. A VENTA-A-NIP ROLL IN THE SECOND PRESS SECTRION AND, ALL WET END INSTRUMENT LOOPS ARE CONTROLLED BY A FOXBORO I/A SYSTEM (NOT INCLUDED IN THE SALE). THE MAIN BANK OF DRYERS CONSISTS OF 40 EACH 48" DIAMETER DRYER CANS, TWO STATIONS EACH WITH ITS OWN MECHANICAL DRIVE SECTIONS. THERE IS A VOITH MORDEN PULPER AT THE END OF THIS SECTION UNDERNEATH THE MACHINE. MOST DRYERS ARE ASME CODED FOR 75 PSIG. - PRE-COATER IS AN INCLINED SIZE PRESSS WITH 16" DIAMETER ROLLS. THE SIZE SUPPLY SYSTEM INCLUDES ALL TANKS AND MOYNO PUMPS. - AFTER DRYER SECTION WHICH FOLLOWS THE PRE-COATER CONSISTS OF 12 EACH 48" DIAMETER DRYER CYLINDERS, - CALENDER STACK IS A ONE NIP BELOIT WITH A CONTROLLED CROWN ROLL. A SECOND VOITH MORDEN PULPER UNDERNEATH IT. (1978) - BELOIT REEL. NEW IN 1996. - WINDER IS A CAN-MACHINE 18 CAMERON TWO DRUM WITHDER, NEW IN 1978 WITH A TIDLAND SLITTER SYSTEM THAT WAS UPGRADED IN 1995. THE MACHINE IS EQUIPPED WITH AN LFE BASIS WEIGHT SENSORS, MIRCO-QUAD MOISTORE SENSOR ON TWO SCANNING "C" FRAMES. THE SIGNALS FROM THE SENSORS ARE INCORPORATED INTO THE FOXBORO I/A SYSTEM (NOT INCLUDED). THERE IS A L&W POROLOG UNIT LOCATED IN FRONT OF THE SIZE PRESS. THE MACHINE IS OFFERED WITH MOST, IF NOT ALL, OF THE SPARE ROLLS FROM PRESS SUCTION THROUGH DANDY ROOLS, CLOTHING, FOILS AND MISC. STOREROOM PARTS. ALL ENGINEERING DATA AND DRAWINGS ARE ALSO AVAILABLE.