WEBER DS13.27 PANELS EXTRUSION LINE

USED FILM RECLAIM LINE MFD 1994 AND LAST USED FOR RECLAIMING FILM SCRAP AT RATES TO 875 POUNDS AN HOUR. EXTRUDER IS A DAVIS STANDARD MODEL 350/600 DUAL DIAMETER HAVING A SEVEN ZONE ELECTRICALLY HEATED, AIR COOLED, AND TOP VENTED AND PLUGGED BARREL. UNIT HAS OVERSIZED FEED THROAT WHICH MEASURES 7" X 12". SCREW AT FEED SECTION IS 6" IN DIAMETER WITH DEEP SCREW FLIGHTS TO FACILITATE MATERIAL FEED. SCREW TAPERS TO 3.5" IN BARREL. GEARBOX HAS A RATIO OF 17.39/1, IS RATED AT 225 HP AT A SERVICE FACTOR OF 1.25 AND IS BELT DRIVEN BY A 150 RELIANCE DC MOTOR WITH SCR CONTROL. FREE STANDING PANEL HAS TEN ZONES OF EUROTHERM 808 TEMPERATURE CONTROLLERS. MOUNTED ON EXTRUDER DISCHARGE IS A 4.5" EXTECH MODEL HSC 45 HYDRAULIC SLIDE PLATE SCREEN CHANGER WITH 3 HP HYDRAULIC POWER PACK. UNDERWATER PELLETIZING SYSTEM IS A GALA MODEL SLC 6 AND INCLUDES 5.5 HP CUTTER. 40 GPM WATER SYSTEM WITH 8.1 BF DRYER AND FREE STANDING CONTROL PANEL. ALSO INCLUDED IS A 28" WIDE PULL ROLL WHICH WAS USED TO HELP FEED FILM TO FEED THROAT, AND BUSCH OIL TYPE VACUUM PUMP.