Stainless Steel Reactors & Kettles

USED 100 GALLON TYPE 316L STAINLESS STEEL CLAD VERTICAL JACKETED AGITATED AUTOCLAVE/POLYMERIZATION SYSTEM. MAIN VESSEL IS 24" ID X 60" STRAIGHT SIDE, GRYLOCK CLOSURE 10" THICK FLAT TOP, WELDED DISHED BOTTOM. MANUFACTURED BY GRAY TOOL COMPANY, N.B. 11, S/N 12752, BUILT IN 1986, INTERNAL RATED 3000 PSI @ 390°F., JACKET RATED 150 PSI @ 600°F., 40 HP AGITATOR DRIVE, WITH AN EKATO MODEL HWL180D DRIVE 7.8:1 RATIO, 225 RPM OUTPUT, 40 HP, 3/60/460 VOLT 750 RPM MOTOR, MECHANICAL SEAL (WITH 15HP HYD.SEAL PRESSURE PUMP) ON 3 1/2" DIA. X 65" LONG AGITATOR SHAFT WITH (4) 8 BLADE PITCHED PADDLE TURBINES, (4)INTERNAL BAFFLES. NOZZLE CONNECTIONS: TOP (1) 2", (1) 4": SIDE (1) 4": BOTTOM (1) 4", 150 PSI FLANGES. 4 LUG SUPPORTS. MOUNTED ON A 100" X 80" PLATFORM WITH PROCESS & SERVICE PIPING. SYSTEM INCLUDES AN ADDITIONAL SKID WITH (1) 8" X 7' HIGH PRESSURE JACKET FILTER COLUMN, 316 STAINLESS STEEL, FLANGED TOP AND BOTTOM, MANUFACTURED BY PROCESS INDUSTRIES, S/N 4640, N.B.#56, INTERNAL RATED 1100 PSI @ 600°F., JACKET RATED 150 PSI @ 600°F., OPENINGS: TOP (1) 1", (1) 2", (1) 1 1/2": 1" CENTER BOTTOM OUTLET, AND WITH (1) 12" X 7" HIGH PRESSURE JACKETED FILTER COLUMN, 316 STAINLESS STEEL WITH FLANGED TOP AND BOTTOM, MANUFACTURED BY PROCESS INDUSTRIES, S/N 8630, N.B.#55, INTERNAL RATED 1100 PSI 600°F, JACKET RATED 100 PSI @ 600°F., AND WITH A 50 GPM @ TDH PROCESS PUMP WITH MECHANICAL SEAL, BELT TRIM 2HP MOTOR, AND WITH AN 88' TOTAL LENGTH 3/4"DIA. T316 STAINLESS STEEL PIPE INCLOSED IN A 1 1/2"DIA. T304 STAINLESS STEEL JACKET MOUNTED IN (8) 11" SECTIONS, ORIGINALLY USED WITH THERMAL OIL HEATING (NO HEATING UNIT W/SYSTEM).