(3) UNUSED Siemens SGE-100EM Natural Gas Skid Mounted Generator:
ENGINE: 2769 BHP, 2065 KW, SGE-100EM, Cylinder V12, Bore/Stroke 195 mm/280 mm, Compression Ratio 13.5:1, Electrical Efficiency 44.5%, Emissions NOX 1 g/bHPh, Fuel Consumption 4,443 BTU/KWh, 1200 RPM, CW Rotation.
GENERATOR: Leroy Somer Nidec 2479 KVA, 1983 KW, 12470 Volt, 3 Phase, 60 hz, PF 0.8, Type LSA 54 VL75/6P, WYE , 6 Wires, Brushless Exciter, CW Rotation, Self Ventilated.
-Generator Terminal Box with Voltage Regulator D550 Digital, 3 x CTS , 2 x VTs.
-1200 AMP Siemens GMSG , 40 KA , 125v CDA Trip and Close Generator Circuit Breaker, with SEL-700G Generator Protection Relay.
-Gas Train Inlet Pressure 14.5 -58 PSIG.
-Starting Batteries for Electric Start.
-Oil Pump, Oil Filter, Oil Cooler, Oil Piping.
-Exhaust Expansion Joint, Exhaust Silencer, Exhaust Pipe.
-Vibration Pads for Mounting.
-Young Touchstone Radiator, 26.9 HP Fan 122 GPM Air/Water Cooled, Piping, Water Pump.
-Siemens PLC GCS-E Control System with Instrumentation.
-Simens 12470 V Switchgear line up consists of following
3 x 1200 amps Simens GMSG , 40 KA , 125 vdc trip and close Generator circuit breakers
3 x SEL-700G Generator protection relays, pts bus and generator side, 9 x 1200:5 cts, lockout
Relays
8 x 1200 amps Siemens GMSG feeder circuit breakers with 8 x SEL-751A Feeder protection relays
-C&D 360 AH battery, battery rack, 125VDC battery charger, 125 vdc distribution panel
- 2 x 1000/1403 kva, Cooper pad mount transformer 12470 delta to 480 Y/277 v
- 1x 1200 amps , 480 v, 4 wire distribution panel
- 1 x 600 amps , 208/120 v distribution panel
- 1 x 225 kva MGM dry transformer 480 v delta to 208 Y/120 v
- 1 x 1200 amps Zenith ATS 480 V
-3 x Post Glover Grounding transformer and resister 12470/7,200 V
-1x Post Glover Zig Zag transformer and resister, 12470 v, 200 amps.
Approximate Shipping Dimensions: Skid 22’ L x 7’9” W x 9’6” 58,993 lbs.
