Used 2000 TPD Cane Sugar Mill Processing Cane to Raw Sugar

Used 2000 tpd cane sugar mill processing cane to raw sugar. 1. The mill used to make raw sugar, which is then sent to refinery to process into white sugar. Maximum capacity of cane processing to raw sugar at this mill was around 2000 tpd. 2. The Mill House - (5 mills) tandem. There is a cane feed table with cane grabber, cane knives, and shredder. There are two drives for five mills. The 1st drive runs mills ##1, 2, and 3 by turbine and Philadelphia gearbox. The 2nd drive runs mills ##4 and 5 by turbine and Lufkin gearbox. All mills are 3-roll mills, and there are no feed rolls attached to them. Size of Mill Rollers is: 33 inches diameter x 60 inches long.  3. Sugar Processing House principal equipment is: (3) juice heaters, (5) vacuum pans without agitators, (11) horizontal crystallizers, (5) bodies 4-stage evaporator, (2) rotary vacuum filters, (2) continuous centrifuges, and (2) batch centrifuges. During campaign it was used one batch and one continuous centrifuge. There are also (2) new C32MT Broadbent batch sugar centrifuges installed in 2012. Pumps include 1 reported new raw juice pump, 2 Nash vacuum pumps condensate pumps, mud and filtrated pumps were installed in 2013- 2014. 4. Power House consists of 4 Babcock bagasse boilers, each rated at 12.5 TPH at 180 psig and 485°F, (1) 1.5MW Triveni steam turbogenerator, (3) Diesel Generators with 2 MW total capacity. Reported that factory consumption was 2.3 MW. The sugar plant could be sold for relocation or to use in place with real estate for an additional price. The milling equipment and the sugar house equipment could be sold individually.