Unavailable

34000 KWLittle Used Kawasaki Gas Turbine Power Plant

Generator AC Gas Engine Driven
Manufacturer:
KAWASAKI
Model:
L30A
Stock #:
ZS63564
Reportedly very little used 34000 kW Kawasaki Gas Turbine Power Plant. Manufacturer: Kawasaki (Japan) Manufacturing year: August, 2020 Type: Co-Generation Still in operation, new in 2020, commercial operation starts in 08/2021, to be shut down at 03/2024. Operating hours 13,298 hours was at 16:00 on May 25, 2023. Expecting total operation hours to 03, 2024 to be around 20,000 hours. There is a steam generator (boiler) that produces steam using exhaust gas. Steam product: 31.2 tph at 7 MPaG, 9 tph at 1.6MPaG, last maintenance was in March, 2023, number of start-up: 66 times. a. Gas Turbine Manufacturer: Kawasaki (Japan) Manufacturing year: August 2020 Condition: little used Model: L30A Fuel: Gas Electric Output(kWe): 34MW Type: Simple open cycle, Two-shaft Compressor: Axial flow 14-stage Combustor: 8-can RPM: 5576 Pressure ratio 24.5 Exhaust gas temperature:  502 °C Heat rate: 8930(Kj/kW-hr) Exhaust gas mass flow: 333.3(x 1000kg/h) LHV of Fuel: 35.9(MJ/Nm3) Thermal efficiency: 41.2% Heat recovery efficiency: 46.1% Total LHV thermal efficiency: 85.5% Overhaul intervals: 6 years Required space for Turbine system +Alternator system:  approx. 11m x 25m x11m (Maximum height of air inlet) Eco-friendly low NOx emissions: NOx reduction method: DLE (Dry Low Emission), NOx: 15 ppm(15%=O2), Operating range of DLE (Dry Low Emission): 70~100% b. Alternator Manufacturer: Meiden (Japan) Manufacturing year: 2020 Condition: A little used Type: Synchronous Rated power: 37,945kVA Rated current: 1992A RPM: 1800 Voltage: 11,000 V Frequency: 60 Hz Phase: 3 Poles: 4 Power factor: 0.90 Field Voltage: 128V Field Current: 598A Weight: 83 ton Required cooling water: 160m3/h Lubricant: 110L/min Weight: approx.84ton c. Steam Absorption Chiller Manufacturer: FCO Kawasaki (Japan) Manufacturing year: August, 2020 Cooling capacity: 2462kW Cold water flow rate: 423.4m3/h Outlet temperature: 7°C Cooling water flow rate: 700m3/h Inlet temperature: 32°C Maximum steam consumption: 2695kg/h Steam inlet pressure: 0.785MPa (Gauge) Power: 440V, 60HZ