Used cutting mill by Alpine, model B32/40 RO. The mill has an inlet to the cutting chamber measuring 400 mm x 355 mm. The rotor is equipped with three knives and has a diameter of 315 mm and a length of 400 mm. The working rotational speed of the rotor is up to 700 rpm. The mill has three static knives. Bottom discharge is through a screen with a mesh of approximately 12 mm. The rotor is belt-driven by an electric motor with a power of 18.5 kW, 1500 rpm, 400 V, 50 Hz. The mill has a stainless steel feeding hopper with inlet dimensions of 390 mm x 240 mm. The mill is equipped with two belt conveyors. The first, feeding material into the mill, has a belt width of 250 mm, with baffles spaced every 675 mm. The working length of this conveyor is 290 cm. The top of the conveyor is covered with insulation. The second conveyor is for transporting the product from the mill discharge and also has a working width of 250 mm, with baffles every 675 mm. Its working length is 200 cm. The mill also has a dust filter with an exhaust fan and electric control boxes for the mill, both conveyors, and the dust filter. There is also a vibration absorption plate for mounting the mill. The machine was new in 1982. Last used on rubber/caoutchouc. Technical documentation included.
We use cookies to improve your experience. Privacy Policy.