Sprühtrockner

UNUSED NIRO MODEL PSD3 316L STAINLESS STEEL SPRAY DRYER. DRYING CHAMBER MEASURES APPROXIMATELY 2000MM DIAMETER X 2000MM STRAIGHT SIDE 60DEG CONE. UNIT IS DESIGNED AT 15KG/HR WATER EVAPORATION AT INLET TEMPERATURE OF 155 DEG.C. AND OUTLET TEMPERATURE OF 75 DEG.C. AND CONDENSER OUTLET TEMPERATURE AT 10 DEG.C. FOR NANO PARTICALS, EVAPORATION CAPACITY OF NON-AQUEOUS FEEDS DEPENDS ON TYPE OF SOLVENT, TEMPERATURE AND OPERATION CONDITIONS. INTERNAL DESIGN PRESSURE RATED 0.15 BAR TO -012 BAR AT 200 DEG.C. UNIT HAS DELAVAN MODEL SDX PRESSURE NOZZLE ATOMISER. SYSTEM INCLUDES FEED PUMPS, ELECTRICAL NITROGEN GAS HEATER WITH MAXIMUM 48KW CONSUMPTION, MAIN SUPPLY FAN AND ANCILLARY FANS AND HEATERS, NIRO BAG DUST FILTER, NIRO CYCLONE, 4 OFF NIRO HEPA FILTERS, 3 OFF CONDERSERS AND ALL INTERCONNECTING PIPEWORK AND CONTROLS.