Paper Converting Machinery

USED JM VOITH FLOTATION DEINKING LINE CONSISTING OF 10 PRIMARY AND 2 SECONDARY 5 CU. M. CELLS. TOTAL CAPACITY APPROXIMATELY 50 TO 75 TPD. PULP CONSISTENCY 0.8% TO 1.2%. CELLS ARE ACID PROOF LINED STEEL WITH PUMPS THAT ARE MAINLY ACID PROOF STEEL. 1.1 KW PADDLE DRIVE MOTOR. CHAIN DRIVE. PADDLE SPEED 19 RPM. WITH SHOWERS, REJECT PUMP, AND SHOWER WATER PUMP. THE LINE INCLUDES THE VOITH DEWATERING PRESS (AS DESCRIBED BELOW) AND OFFERED AS IS, WHERE IS. THE SYSTEM IS DISMANTLED AND STORED BOTH OUT AND INDOORS. ADDITIONAL INFORMATION: DE-INKING LINE FLOTATION CELLS. MANUFACTURER: J.M. VOITH MANUFACTURING YEAR: 1975. TYPE: FLOTATION DE-INKING LINE. VOLUME: 5 M3 / EACH CELL. (NET VOLUME.) CAPACITY: 50 TPD. (APPROX. 5 TPD / EACH CELL.) MAX. 60–70 TPD. PULP CONSISTENCY: 0,8 - 1,2 % ATRO. CELLS AVAILABLE: 12 NOS. (2 SECONDARY AND 10 PRIMARY CELLS.) WEIGHT OF EACH CELL: 2.800 KG ( FILLED 8.000 KG.) MATERIAL: CELLS ACID PROOF LINED, FLOTATION PUMPS OF MAINLY ACID PROOF POWER NEED EACH CELL: 11 KW. (MOTOR 15 KW, 1460/480 RPM. 500 V. V-BELT DRIVE). PADDLE DRIVE MOTOR: 1,1 KW. PADDLE SPEED 19 RPM. ( GEAR DRIVE.) SHOWER WATER AMOUNT: 20 L/MIN./CELL. SHOWER WATER PRESSURE: 4 BAR. REJECT PUMP: CA 4.000 L/MIN, MOTOR 18 KW. SHOWER WATER PUMP: 300 L/MIN. 85 M. LIFT HEIGHT. MOTOR 4,5 KW. BOTH PUMP MOTORS VOLATAGE: 500 V CELL OVERALL SIZE: 3.100 X 2.100 X 2,400 MM. (LXWXH) OTHER EQUIPMENT: MIXING TANK AND FOAM COLLECTING TRAYS INCLUDED. DEWATERING PRESS: VOITH BELT PRESS (SEE SPECIFICATION HEREUNDER.). DEWATERING PRESS. MANUFACTURER: J.M. VOITH, GERMANY. MANUFACTURING YEAR: 1975. TYPE: 1000 SB 1 MODEL: BELT PRESS. CAPACITY: 83 TPD BY INLET CONSISTENCY OF 6% AND OUTLET CONSISTENCY 25% MAIN UNITS: HEADBOX. DEWATERING DRUM, DIA 1.250 MM.PRE-PRESS PICK-UP ROLL TO DRUM, DIA 285 MM.TWIN NIP PRESS. ROLL DIA. 2 X 368 MM. AND 520 MM. (CENTER ROLL.). PNEUMATIC PRESSING.WIRE GUIDE ROLL, DIA 366 MM. WIRE STRETCH ROLL DIA. 285 MM. AIR SUPPLY: 5 BAR 3,5 M3/H. SPEED: STEPLESS FROM 13,9 TO 41,7 M/MIN. WORKING WIDTH: 1.000 MM. WIRE WIDTH: 1.200 MM. ROLL FACE: 1.300 MM. SPARY PIPES: TWO NOS, WATER PRESS 10BAR 60L/MIN FOR THE DRUM AND 2.5-3BAR, 45 L/MIN. FOR WIRE. DRIVE: GEARMOTOR 11 KW W/ GEAR SPEED REGULATOR 12-36 RPM. SPACE NEED: APPROX. 5.200 X 6.000 X 3.000 MM (LXWXH)INCLUDING SERVICE AREAS. CONDITION: STOPPED IN OPERATING CONDITION BUT NEEDS GENERAL OVERHAULING,