Extruzní linky na výrobu desek

USED 56" WIDE GLOUCESTER SHEET EXTRUSION LINE. LINE WAS MANUFACTURED 1996 AND HAS LIMITED USE. LINE CONSISTS OF THE FOLLOWING: A) (1) USED 3.5" 30:1 GLOUCESTER EXTRUDER HAVING AN ELECTRICALLY HEATED, AIR COOLED BARREL (CONTRA COOL) AT A 72" CENTERLINE HEIGHT. GEARBOX HAS A RATIO OF 10.85:1 AND IS DRIVEN BY 150 HP DC MOTOR WITH SCR CONTROL. CONTROL IS VIA A GLOUCESTER EXTROL SYSTEM. B) (1) USED EXTECH HYDRAULIC SLIDE PLATE SCREEN CHANGER HAVING (2) NOMINAL 3.5" DIAMETER BREAKER PLATES WITH HYDRAULIC POWER PACK. C) (1) USED CLOEREN 54" SHEET DIE HAVING A BACK CENTER FED ENTRANCE, UPPER FLEXIBLE LIP, AND FIXED REMOVABLE LOWER LIP. JO # 96-1521 E) (1) USED GLOUCESTER SHEET TAKE OFF UNIT HAVING (3) 56" FACE X 18" DIAMETER CHROME PLATED ROLLS MOUNTED IN A HORIZONTAL ARRANGEMENT. EACH ROLL IS DRIVEN BY A 3 HP AC MOTOR WITH INVERTER. ROLLS ARE HYDRAULICALLY LOADED. STAND ALONE THREE ZONE WATER TEMPERATURE CONTROL SYSTEM WITH PUMPS, HEATERS, AND HEAT EXCHANGER. F) (1) MEASUREX INLINE THICKNESS MEASURING DEVICE WITH CONTROLS. G) (4) SINGLE STATION UNWIND STANDS WITH BRAKES H) (1) USED 60" WIDE FAMCO MODEL HS1460 AIR ACTUATED SHEAR RATED TO 5/16" THICK MATERIAL AND ABS SHEET. I) APPROXIMATELY 15' LONG RUN OFF TABLE. J) SPARE PARTS INCLUDED BUT NOT LIMITED TO TWO (2)SPARE SINGLE STAGE SCREWS, (1) SPARE TWO-STAGE SCREW, (7) SPARE MAIN CHILL ROLLS (1 CHROME, 2 MATT FINISH, 4 SILICON RUBBER), (2) IMMERSION HEATERS AND WATER PUMP FOR WATER SYSTEM ON ROLLS AND SPARE SCREEN FOR THE EXTROL SYSTEM.