Compuesto y recuperación de líneas de extrusoras

USED BATTENFELD/HARTIG DUAL DIAMETER FILM RECLAIM LINE NEW 12/1993. LINE STILL INSTALLED AS OPERATED AND CONSISTS OF FOLLOWING: A)APPROXIMATELY 140" TALL AIR AGITATED FLUFF HOPPPER APPROXIMATELY 60" DIAMETER AT HIGHEST POINT TAPERING TO 8" X 15" FEED. HAS MOTORIZED MECHANICAL AGITATOR AT FEED THROAT TO PREVENT BRIDGING. B) BATTENFELD/HARTIG 8"/4.5" DUAL DIAMETER EXTRUDER. BARREL CONSISTS OF 52" LONG 8" DIAMETER SECTION AT FEED AND TAPERS TO 4.5" SECTION WITH 30/1 L/D. BARREL IS WATER COOLED(CLOSE LOOP), IS CURRENTLY PLUGGED AND INCLUDES VACUUM PUMP AND VENT STACK. WATER COOLED FEED THROAT HAS A 8" X 15" ENTRANCE. GEARBOX IS A LUFKIN MODEL DH225CBN-811 HAVING A 14.06/1 REDUCTION RATIO AND IS RATED AT 363HP AT 1750 RPM INPUT. GEARBOX SERIAL #9121, ORDER #847914. GEARBOX IS DIRECT DRIVEN IN A WRAP AROUND MANNER BY A 200 HP GE DC MOTOR WITH SIEMENS SCR CONTROL. EXTRUDER BARRELS AND DC DRIVE WERE NEW IN APPROXIMATELY 2003. FREE STANDING TEMPERATURE CONTROL PANEL HAS (13) BARBER COLEMAN MODEL 7EM INSTRUMENTS AND(1) MELT TEMPERATURE INDICATOR. 460 VOLT AC INPUT. HAS NEW SPARE 8" SCREW FOR FEED SECTION. C) MOUNTED ON THE EXTRUDER DISCHARGE IS A BERINGER MODEL SL-60 HYDRAULIC SLIDE PLATE SCREEN CHANDER HAVING TWO NOMINAL 6" DIAMETER BREAKER PLATES. SERIAL #77237 MODEL 6SL825-3. INCLUDES A 2 HP MODEL HPNVL HYDRAULIC POWER PACK WITH HOSES. T SCREEN CHANGER HAS HAS (2) PRESSURE GAUGES FOR BEFORE AND AFTER SCREEN PACK. D) DOWNSTREAM OF THE SCREEN CHANGER IS A BERINGER MODEL WRP12V WATER RING STYLE PELLETIZER. INCLUDES 3 HP SPIN DRYER, PEDESTAL STAND FOR PELLETIZER HEAD, AND OPERATOR CONTORL PANEL.