PVC Board Production Line

Used Battenfeld-Cincinnati PVC board production line was manufactured in 2012 and shut down in 2017. Running hours about 1110 hours. Electric devices manufactured by Siemens (Germany). CE marked. Main Equipment List: 1) 135mm Twin Screw Extruder Manufacturer: Battenfeld-Cincinnati (Germany) (Group of SMS) Manufacturing year: 2012 Model: Argos 135PL L/D ratio of 28:1 Application: Profile / Pipe / Sheet Running hours: 1110 hours Maximum output: 1350 kg/hour (Advantages) - 4-shaft gear technology - 100% fully insulated barrel - Four-shift concept - Long processing unit - apc high-capacity air cooling - Mo-plasma coated screws - Homogeneous temperature distribution  2) 58mm Twin Screw Extruder Manufacturer: Battenfeld-Cincinnati (Germany) (Group of SMS) Manufacturing year: 2012 Model: Titan 58P 27.5 KW AC motor Screw speed: Max. 29 rpm No. of barrel zones: 4 No. of sie zones: 4 Hopper volume: 170 liter   3) Pre-mixing system Manufacturer: Battenfeld-Cincinnati (Germany) Manufacturing year: 2012 Maximum 2500 kg/hour (Advantages) Dynamic pre mixing system for several materials Directly above the intake unit Increase of material homogenization Increase of screw filling factor Improvement of even foaming process   4) Sheet die (Flat die) Manufacturer: EMO (Austria) Manufacturing year: 2012 Model: E-SD1-1400 Die body: 1400x 330 x 500mm Weight with assembled parts and adapter: ~1750 kg Operating pressure: Maximum 250 bar Exit width: 1400mm Die body material:  1.2316 Hardened to 980~1100N/mm2 Polymer sliding surfaces: Polished Ra< 0.1 μm                       Lip polished Ra< 0.05 μm Flow channel: Coat hanger distributor Heating: Electrical heating (Heater cartridge) Heating power: 20 kW, 230V Operating temperature: up to 300 °C (Advantages) -Stainless steel execution -Easier to clean (polishing) in comparison to chrome plated dies -Burn damages can be repaired easily in comparison to re-chroming of dies -Chrome or chromium nitride plated surface (optionally for C-PVC, or tin stabilization) Optimized flow characteristic -computer calculated melt flow channel -Even melt distribution via coat hanger die channel -Low melt pressure due to large melt channel volume -Flex lip   5) Fast gap system Manufacturer: Battenfeld-Cincinnati (Germany) Manufacturing year: 2012 (Features) Constant and even gap change over complete die width Adjustment by hand wheel or electrically Adjustment range plus minus 3 mm   6) Polishing unit Manufacturer: Battenfeld-Cincinnati (Germany) Manufacturing year: 2012 (Features) Up to 2 inch thickness Electrical gap adjustment Rolls up to 2800mm total width Line speed 0.1 -5(10)m/min Constant roll surface temperature plus minus 0.5 Automatic roller gap adjustment   7) LDFF Unit Manufacturer: Battenfeld-Cincinnati (Germany) Manufacturing year: 2012 (Features) Cooling rolls outer diameter 100mm Separate height adjustable rolls 3 pair of rollers   8) Intensive Cooling Unit Manufacturer: Battenfeld-Cincinnati (Germany) Manufacturing year: 2012 (Features) Harden skin (passes thumb nail test) Better tolerances(1/4 of ISO standard) Preventing yellowing effect Shorter cooling length(approx.. 5m) Possibility of automatic thickness measurement   9) Side and Trim cutting machine Manufacturer: Battenfeld-Cincinnati (Germany) Manufacturing year: 2012 (Features) Precise width of finished sheet No flexing of blades Easy handling Exact 90 degree cut No noise, dust Sheet thickness up to 31.7mm   10) Cutting saw Cutting speed: 0~8 m/min Minimum length of sheet: 300mm Possibility to cut within tolerance of plus minus 0.5mm