200 Tons/Day Beet Pulp Drying Complex Pulp Dryer Swidnica

Used 200 Ton/Day (DM Content 22%) Beet Pulp Drying Complex From the Polish manufacturer SFUP (Swidnica, Poland) Manufactured in 1981, but was in operation for less than 10 campaigns Detailed specifications of drying equipment listed below: - Combustion chamber Diameter: 3400 mm Length: 12000 mm Furnace is manufactured from the carbon steel with the inner fire-resistant brick lining - Natural gas block burner Delivery scope of the burner: Natural gas burner manufactured by ELCO-KLOCKNER, for industrial use, modulating, with the ability to change the flame geometry 2-block execution type RPD 80 G-R - Combustion air fan Capacity: 38 000 m³/h Motor: 100 kW - Gas burner accessories Gas pressure at the inlet: 3 bar Gas pressure behind the regulator: 150 mbar - Cabinet with control and safety equipment - Fan for blowing air into the mixing chamber Capacity: 80000 m³/h Pressure: 1600 Pa 100 Motor -Drying drum Nominal capacity for the dried beet pulp, with the DM content for the pressed pulp at the inlet 22%: 200 t/d Diameter of the drum: 3400 mm Length of the drum: 18200 mm Drive power: 55 kW - Components of a drying drum: Drum with the supporting rings (girth gear) – 2 pcs. Discharge chamber with the discharge wheel 1 pc. Supporting frames with the rollers 2 pcs. Drive with the frame 1 pc. Sealing between the combustion chamber and drying drum – 1 pc. Feeding chute 1 pc. Drum speed is infinitely adjustable in the range of 1-5 rpm Drum material: carbon steel - Cyclone block consist of 2 cyclones Height: 2 x 4 200 mm Material: carbon steel - Exhausting fan Capacity: 250000 m³/h Pressure: 2000 Pa Motor: 160 kW - Rotary valve for discharge of the dust from cyclone Opening dimension: 300 x 300 mm Height: 500 mm Motor: 1.1 kW - Feeding screw conveyor for pressed beet pulp Diameter: 500 mm Length: 4000 mm Gearmotor: 7.5 kW - Discharge screw conveyor for dried beet pulp Diameter: 500 mm Length: 6500 mm Gearmotor: 7.5 kW - Discharge screw conveyor for dried beet pulp Diameter: 500 mm Length: 6500 mm Gearmotor: 7.5 kW