Extruder-Blasfolienanlage

USED CO-EXTRUSION BLOWN FILM LINE CONSISTING OF THE FOLLOWING: A) (1) USED 3.5" 34:1 ALPHA MARATHON EXTRUDER HAVING SEVEN ZONE ELECTRICALLY HEATED, AIR COOLED BARREL AT APPROXIMATELY A 24" CENTERLINE HEIGHT. ZAMBELLO GEARBOX IS BELT DRIVEN BY A 150 HP DC MOTOR WITH ABB DCS 400 SCR CONTROL. EXTRUDER BARREL IS SIDE VENTED AND INCLUDES VACUUM PUMP. SCREW AND BARREL WERE REPLACED IN 2009. MANUAL SCREEN CHANGER IS MOUNTED ON BARREL DISCHARGE. EXTRUDER MANUFACTURED IN 1995. WITH FREE STANDING CONSOLE TYPE TEMP CONTROL PANEL HAVING TEN(10) ZONES OF OMRON TEMP CONTROLLERS. B) (1) USED ALPHA MARATHON 2.5" 24:1 EXTRUDER HAVING A FOUR(4) ZONE ELECTRICALLY HEATED WATER, COOLED BARREL AT APPROXIMATELY A 24" CENTERLINE HEIGHT. ZAMBELLO GEARBOX HAS A REDUCTION RATIO OF 14/1 AND IS DRVIVEN BY A 75 HP GE AC MOTOR WITH GE INVERTER. MANUAL SCREEN CHANGER IS MOUNTED ON DISCHARGE. WITH FREE STANDING TEMPERATURE CONTROL PANEL HAS NINE(9) ZONES OF ALPHA MARATHON CONTROLLERS. EXTRUDER MFD 1999. C) (1) USED 12" CO-EX BLOWN FILM DIE WITH ABA CONFIGURATION. FREE STANDING PANEL WITH D R JOSEPH IBC CONTROLS AND FIVE ZONES OF TEMPERATURE CONTROLLERS. PACAKAGE INCLUDES DUAL LIP AIR RING, 20 HP, 10 HP AND TWO APPROXIMATELY 5 HP BLOWERS, BERG MODEL BFC-750 AND BFC-1000 LH POLYCOOLS, AND BUBBLE CAGE. BUBBLE CAGE HAS MOTORIZED ADJUSTMENT FOR HEIGHT AND DIAMETER AND TWO SENSORS FOR BUBBLE DIAMETER. D) (1) USED 84" ALPHA MARATHON PRIMARY NIP WITH 3 HP DRIVE AND WOODEN COLLAPSING FRAME .